Coated wear-resistant nozzle for Raise3D Pro2 series
Raise3D worked with Micro-Swiss to supply a coated wear-resistant nozzle for the Raise3D N-series printer.
Sizes available: 0.2mm / 0.4mm / 0.6mm / 0.8mm / 1.00mm (please select)
Fits for ： Raise3D Pro series
Instructions for removing the hotends
Instructions for changing nozzles on the Raise3D Pro2 series
This nozzle consists of a 360 brass base material and is provided with a TwinClad XT coating. TwinClad XT is a nickel composite coating that is designed for very low friction. It offers one of the lowest coefficients of friction, better than PTFE co-coated nickel. This coating is also very hard and abrasion-resistant. Working with abrasive carbon fiber, stainless steel, wood-filled or other metal-filled filaments will greatly improve the life of your nozzle.
Manufacturer: TwinClad XT
Hardness HVN (as coated): 550-600
Hardness Rc (as coated): 53-55
Hardness HVN (heat treated): 825-900
Hardness Rc (heat treated): 65-67
Taber Wear Index (mg / 1000 cycles as coated): 42371
Coefficient of friction vs. Steel (dry): 0.08
Extra low friction
Used in injection molding
Very good release properties
High hardness (53-55 Rc)
Please note: Nozzles can only be changed after the filament has been unloaded and when they are hot. Wear gloves to do this.