FLASHFORGE ABS FILAMENT 1.75MM / 2.2 lB (1KG)These are 1kg 1.75mm ABS filaments made by Flashforge. This is the new improved formula which highermanufacturing tolerances, now +-0.2mm. This is a low cost material which prints exceptionally. The spoolsare specifically designed to fit on the Creator Pro and Guider printers, however they can be used on..

FLASHFORGE FLEXIBLE (TPU) 1KG 3D FILAMENTPRODUCT SPECIFICATIONSMaterial: TPUBrand: FlashforgeColor: Black, NaturalDiameter: 1.75mmPrint Temperature: 210 Degree CelciusMelting Temp: 190-230 Degree CelciusGlass Temp: 50-60 Degree CelciusMinimum Order Quantity: 1 PiecePRODUCT DESCRIPTIONFlexible filament as made by Flashforge. These filaments work inc..

Characteristic1. Good mechanical strength, impact resistance is 10 times higher than normal filament and elongation at break is 50 times higher than normal filament. 2. It has good corrosion resistance and is resistant to many organic solvents. 3. Good abrasive resistance! 4. Good aging resistance!  Advantages1. High transparency and 90% ..

These are 1kg 1.75mm PETG filaments made by Flashforge. This is a new line of filaments from Flashforge which are made from high quality and pure PETG materials.PETG is a filament similar in rigidity to PLA while retaining significantly higher structural integrity and strength. In fact PETG is one of the strongest materials currently available on t..

1. New-upgraded Formulation.Minimizing Filament Problems. Stored For a longer Time. The New-upgraded formulation engineered by FlashForge helps to minimize filament problems such as warping, curlingand bubbles during printing. The anti-moisture ingredients included in this formulationpermits longer storage time without loss of quality. Always use u..

FLASHFORGE PVA WATER SOLUBLE 0.5KG BLACK 3D FILAMENTThis is a 0.5kg 1.75mm roll of PVA filament as made by Flashforge.This material is water soluble, making it absolutely invaluable as asupport structure for 3D printers that work with multiple materials.Simply use this filament as the support material when printing anincredibly complicated 3D objec..

INTAMSYS  PEEK 1.77MM ORIGINAL FILAMENTThe INTAMSYS PEEK Filament has unique properties becauseit does not come into contact with water during the productionprocess and is directly packaged in a vacuum packaging.These properties make the INTAMSYS PEEK Filament particularlysuitable for usage in FFF 3D printers. The material has an excellentadhe..

INTAMSYS ULTEM 1010 ORIGINAL 3D FILAMENT 500GFILAMENT SPECIFICATIONSDiameter:  1. 75mm (+/- 0.05mm)Colors:  Natural and BlackRECOMENDED PRINT CONDITIONSExtruder Temp: 330 – 350°C (all-metal extruder)Bed Temp: 110 – 120°CBed Prep: Kapton Tape & PVP GlueADDITIONAL INFORMATIONExtruder Temperature: 330 – 350°C (al..

INTAMSYS ULTEM 9085 ORIGINAL 3D FILAMENT 500gFILAMENT SPECIFICATIONSDiameter:  1.75mm (+/- 0.05mm)Colors:  Natural (Light Tan) and BlackRECOMMENDED PRINT CONDITIONSExtruder Temperature: 330 – 350°C (all-metal extruder)Bed Temperature: 110 – 120°CBed Prep: Kapton Tape and PVP GlueADDITIONAL INFORMATIONExtruder Temperature: 330 – 350°C (all..

3D printing of elastic parts. Prima SELECT NylonPower PA 6/66 is a special copolymer blend that takes full advantage of the strengths of PA6 and PA66. The combination of these two types of polyamide makes our NylonPower very easy to 3D print.Basic properties of Nylon Power PA6 / 66Perfect combination of PA6 and PA66High chemical and thermal resista..

Item DescriptionArticle No. S0J1Y04DP2ZMORPH ABS + - 1.75 mm - 750 G - GRAYSPECIFICATIONS:Good dimensional stabilityHigh impact strengthHeat resistance (HDT 0.45 MPa 91⁰C)Better layer adhesionWaterproofTypical valueTest method Glass transition temperature: 114 ° C ISO 11357Elastic modulus: 1379/1106 MPa ISO 527Elongation at break: 10.9% / 21% ISO 5..

SPECIFICATIONS:Good dimensional stabilityHigh impact strengthHeat resistance (HDT 0.45 MPa 91⁰C)Better layer adhesionWaterproof Typical valueTest method Glass transition temperature 114 ° C ISO 11357Elastic modulus 1379/1106 MPa ISO 527Elongation at break 10.9% / 21% ISO 527Tensile strength 29.5 MPa / 17.9 MPa ISO 527Impact strength 32 kJ / m2..

SPECIFICATIONS:Good dimensional stabilityHigh impact strengthHeat resistance (HDT 0.45 MPa 91⁰C)Better layer adhesionWaterproofTypical valueTest method Glass transition temperature 114 ° C ISO 11357Elastic modulus 1379/1106 MPa ISO 527Elongation at break 10.9% / 21% ISO 527Tensile strength 29.5 MPa / 17.9 MPa ISO 527Impact strength 32 kJ / m2 / 2.5..

SPECIFICATIONSHeat resistance: (HDT 0.45 MPa 101⁰C)Chemical resistanceUV resistanceWaterproofEasy post-processingTypical valueTest method Glass transition temperature: 104 ° C ISO 11357Elastic modulus: 1958 MPa / 1608 MPa ISO 527Breaking elongation; 7.4% / 1.8% ISO 527tensile strength: 36.3 MPa / 21.3 MPa ISO 527impact force; 8.9 kJ / m² / 2.7 kJ /..

SPECIFICATIONSHeat resistance: (HDT 0.45 MPa 101⁰C)Chemical: resistsUV resistanceWaterproofEasy post-processingTypical valueGlass transition temperature: 104 ° C ISO 11357Elastic modulus: 1958 MPa / 1608 MPa ISO 527Elongation at break: 7.4% / 1.8% ISO 527Tensile Strength: 36.3 MPa / 21.3 MPa ISO 527Impact strength: 8.9 kJ / m² / 2, 7 kJ / m² ISO 17..