Raise3D Pro2 V3H Nozzle 0,2mm / 0,4mm / 0,6mm / 0,8mm / 1,0mm

Raise3D Pro2 V3H Nozzle 0,2mm / 0,4mm / 0,6mm / 0,8mm / 1,0mm

46.00 € 63.00 € -27%
Brand:
Product Code: 0683813778269
Availability: 2-3 Days
Viewed 332 times

Product Description

Product information "Raise3D Pro2 V3H Nozzle 0.2mm / 0.4mm / 0.6mm / 0.8mm / 1.0mm"

Coated wear-resistant nozzle for Raise3D Pro2 series

Raise3D worked with Micro-Swiss to supply a coated wear-resistant nozzle for the Raise3D N-series printer.

Sizes available: 0.2mm / 0.4mm / 0.6mm / 0.8mm / 1.00mm (please select)

Fits for : Raise3D Pro series

 

Instructions for removing the hotends

Instructions for changing nozzles on the Raise3D Pro2 series

This nozzle consists of a 360 brass base material and is provided with a TwinClad XT coating. TwinClad XT is a nickel composite coating that is designed for very low friction. It offers one of the lowest coefficients of friction, better than PTFE co-coated nickel. This coating is also very hard and abrasion-resistant. Working with abrasive carbon fiber, stainless steel, wood-filled or other metal-filled filaments will greatly improve the life of your nozzle.


Manufacturer: TwinClad XT

Hardness HVN (as coated): 550-600

Hardness Rc (as coated): 53-55

Hardness HVN (heat treated): 825-900

Hardness Rc (heat treated): 65-67

Taber Wear Index (mg / 1000 cycles as coated): 42371

Coefficient of friction vs. Steel (dry): 0.08


Extra low friction

Used in injection molding

Very good release properties

High hardness (53-55 Rc)

Wear-resistant

Corrosion Resistant


Please note: Nozzles can only be changed after the filament has been unloaded and when they are hot. Wear gloves to do this.

Write a review

Please login or register to review
Track Order