VOXELAB AQUILA - 220*220*250MM 3D PRINTER

AQUILA is a new high quality yet affordable printer from VOXELAB. Besides its modern sleek design, it has all the features you would expect from a modern 3D printer. Voxelab is a subsidiary of Flashforge that was launched in 2020. The goal is to provide the market with extremely cost effective 3D printers

Peculiarities:

• Large build volume
• All-metal frame
• Resume printing
• Color screen
• Heated bed - 100 ° C
• Print temperature - Max 250 ° C
• Easy to operate
• Carbon Crystalline Silicon Glass Platform

VOXELAB AQUILA - 220 * 220 * 250 mm

AQUILA is a new high quality yet affordable printer from VOXELAB. Besides its modern sleek design, it has all the features you would expect from a modern 3D printer.

Voxelab is a subsidiary of Flashforge that was launched in 2020. The goal is to provide the market with extremely cost effective 3D printers.

Large build volume

Despite its small form factor, AQUILA can print large models of 220 x 220 x 250mm. This is the ideal build size and will suit most needs

All-metal frame

The sturdy frame ensures that vibrations are not transmitted through the structure.

Resume printing

If a power outage occurs, the printer will pause. When the power returns, the printer can resume printing where it left off.

Color screen

The superb 3.5-inch screen gives you easy access to all printer settings. You have a comfortable swivel handle to help you navigate.

Heated bed

The heated build platform can reach 100 ° C in less than 5 minutes. A heated build plate is very important if you want to print on materials like PETG or ABS +, but even with many modern PLA types, it's much easier to get good results if you have a heated bed

Good printable surface

Silica glass carbon crystal plate provides strong adhesion. This is very important to minimize the risk of deforming the model. To enhance the effect and facilitate removal, we recommend you apply a PrimaFix coating.

Plug and play (almost)

The printer is largely assembled, with only a few components to be assembled (for shipping reasons). The printer will be ready for use in a few minutes.

Construction and technical details

Used filament diameter 1.75mm

Max nozzle temperature 250 ºC

Open Filament System Yes

Extruder type Bowden

Recommended print speed Max. 180 mm / s (depending on media))

Building area 220 mm x 220 mm x 250 mm

Maximum working plate temperature 100 ºC

Assembly plate material Crystal carbon silicon glass plate

Clamp for fixing the mounting plate

Precast plate alignment system Manual alignment

Build a camera in the process of opening

Extruder number 1

Installation site / requirements

Total weight Dimensions 475 mm x 480 mm x 473 mm

Total weight 8.2 kg

Ambient operating temperature 15 ° C - 30 ° C

Maximum power consumption 350 W

AC voltage: 115 V / 230 V (50/60 Hz)

DC current: 24V

Equipment

Hepa filter no.

Loss of Power Failure Protection Yes

Touch Screen No

Connection

SD Card Yes, micro-SD

WLAN No

Accuracy

Layer height 0.1 - 0.4 mm

Resolution 0.2mm

Transportation

Shipping box 565 mm x 375 mm x 215 mm

Gross weight 10 kg

WHAT'S INCLUDED

• 3D printer
• Power cable
• Cable ties
• Needle
• M6 Pneumatic hinge
• Delete tool
• Memory card and card reader
• Needle
• 50 g of thread
• Nozzle
• Screw set
• User guide